NaNe2FetP


In a piston engine, a piston rod joins a piston to the crosshead and thus to the connecting rod that drives the crankshaft or (for steam locomotives) the driving wheels. Internal

combustion engines, and in particular all current automobile engines, do not generally have piston rods. Instead they use trunk pistons, where the piston and crosshead are combined and so do not need a rod between them. The term piston

rod has been used as a synonym for 'connecting rod' in the context of these engines. Engines with crossheads have piston rods. These include most steam locomotives and some large marine diesel engines. Piston rods are usually

attached to the crosshead and the piston by a transverse slot and a tapered key or gib. Driving this key sideways tightens the attachment. Using a transverse key allows relatively easy dismantling for maintenance. Some smaller pistons

are retained by a threaded piston rod and a large nut, although the crosshead nearly always uses a key. As the precise length of the piston rod is important for timing the engine's valvegear, the attachment tightens the piston down

onto a fixed step or location in the piston rod and the length (and valve timing) is not adjustable. This length requires the precision of the manufactured rod but, unlike the rod driving the valves, does not need to be adjusted even

more precisely by a fitter during the engine's erection.


The stainless steel piston rod is processed by rolling, because the surface layer has residual compressive stress on the surface, which helps to seal

the tiny cracks on the surface and hinders the expansion of erosion. Therefore, the corrosion resistance of the surface can be improved, and the generation or expansion of fatigue cracks can be delayed, thereby improving the fatigue

strength of the cylinder rod. Through roll forming, a cold work hardening layer is formed on the rolling surface, which reduces the elastic and plastic deformation of the contact surface of the grinding pair, thereby improving the wear

resistance of the surface of the cylinder rod and avoiding burns caused by grinding. After rolling, the reduction of surface roughness value can improve the fit properties. At the same time, the friction damage to the seal ring or the

seal when the cylinder rod and piston moves is reduced, and the overall service life of the oil cylinder is improved. The rolling process is a high-efficiency and high-quality process measure, and the brand-cut rolling head (45 steel

seamless steel pipe) is an example to prove the rolling effect. After rolling, the surface roughness of the cylinder rod is reduced from Ra3.2~6.3um to Ra0.4~0.8um before rolling, the surface hardness of the cylinder rod is increased by

about 30%, and the surface fatigue strength of the cylinder rod is increased by 25%. The service life of the oil cylinder is increased by 2 to 3 times, and the rolling process is about 15 times more efficient than the grinding process.

The above data shows that the rolling process is efficient and can greatly improve the surface quality of the cylinder rod. Stainless steel piston rods are mainly used for piston rods for hydraulic pneumatics, engineering machinery,

automobile manufacturing, roller shafts for packaging machinery, printing machinery, textile machinery, shafts for conveying machinery, and linear optical shafts for linear motion.


A hydraulic cylinder (also called a linear hydraulic motor) is a mechanical actuator that is used to give a unidirectional force through a unidirectional stroke. It has many applications, notably in construction equipment

(engineering vehicles), manufacturing machinery, elevators, and civil engineering. The main function of the cylinder body is to contain cylinder pressure. The cylinder barrel is

mostly made from honed tubes. Honed tubes are produced from Suitable To Hone Steel Cold Drawn Seamless Tubes (CDS tubes) or Drawn Over Mandrel (DOM) tubes. Honed tubing is ready to use for hydraulic cylinders without further ID

processing. The surface finish of the cylinder barrel is typically 4 to 16 microinch. Honing process and Skiving & Roller burnishing (SRB) process are the two main types of processes for manufacturing cylinder tubes. The piston

reciprocates in the cylinder. The cylinder barrel has features of smooth inside surface, high precision tolerance, durable in use, etc.



Steel tubes are steels with a hollow cross-section whose length is much greater than the diameter or circumference. According to the cross-sectional shape, it can be divided into

round, square, rectangular and special-shaped steel pipes; According to the material, it is divided into carbon structural steel pipe, low alloy structural steel pipe, alloy steel pipe and composite steel pipe; According to the purpose,

it is divided into pipelines, engineering structures, thermal equipment, petrochemical industry, machinery manufacturing, geological drilling, high-pressure equipment steel pipes, etc.; According to the production process, it is divided

into seamless steel pipes and welded steel pipes. Among them, seamless steel pipes are divided into two types: hot-rolled and cold-rolled (drawn), and welded steel pipes are divided into straight seam welded steel pipes and spiral seam

welded steel pipes. Steel pipes are not only used for conveying fluids and powdered solids, exchanging thermal energy, making machine parts and containers, but also an economical steel. Using steel pipes to make building structure grids,

pillars and mechanical supports can reduce weight, save 20-40% of metal, and realize factory-based mechanized construction. Using steel pipes to manufacture highway bridges can not only save steel and simplify construction, but also

greatly reduce the area of protective coating, saving investment and maintenance costs.


Stainless steel tube is a kind of hollow long round steel, which is mainly used in industrial transportation pipelines and mechanical structural components such as

petroleum, chemical industry, medical treatment, food, light industry, mechanical instrument and so on. In addition, when the bending and torsional strength are the same, the weight is lighter, so it is also widely used in the

manufacture of mechanical parts and engineering structures. It is also commonly used as furniture and kitchenware. There are various connection methods for stainless steel tubes. The common types of pipe fittings are compression type,

compression type, union type, push type, push thread type, socket welding type, union flange connection, welding type and welding and traditional connection. Combined derivative series connection method. These connection methods have

different application scopes according to their different principles, but most of them are easy to install, firm and reliable. The sealing ring or gasket material used for the connection is mostly made of silicone rubber, nitrile rubber

and EPDM rubber that meet the requirements of national standards, which relieves users from worries.


Hydraulic steel pipes are basically divided into fluid pipes and oil steel bobbins used in hydraulic systems, also known as honed tubes, while cold-drawn or cold-rolled precision

seamless steel pipes also include hydraulic steel pipes. The fluid pipe on the hydraulic system is close to the domestic national standard GB3639-83. Introduction of hydraulic steel pipe: cold-drawn or cold-rolled precision seamless

steel pipe with high dimensional accuracy and good surface finish for hydraulic equipment. The precision seamless steel pipe is used to manufacture mechanical structures or hydraulic equipment, etc. The precision steel pipe is a high-

precision seamless steel pipe after cold drawing or cold rolling. Because there are no oxide layers on the inner and outer walls of the precision steel pipe, no leakage under high pressure, high precision, high finish, no deformation in

cold bending, no flaring, no cracks in flattening, etc., it is mainly used to produce pneumatic or hydraulic products.